Clonex Pro needs an active licence before its screens open. Licences of all ARN Smart products on a site are managed in one place: ARN Smart → ARN Center → Licences. Clonex Pro 2.x and earlier showed this screen as Settings → ARN Center → Licences; Clonex Pro 3.0.0 moved it into the ARN Smart menu.
Activate the licence
- Get your activation code. Open the link in your licence email to request an ARNA activation code. The code is sent to the same email address; you do not need an account. The code starts with
ARNA-. It works once and binds the licence to your site address. - Open the Licences screen. In your WordPress admin, go to ARN Smart → ARN Center and open the Licences tab. While the licence is not active, ARN Smart → ARN Clonex also shows the button Open Settings → ARN Center → Licences, which opens the same screen.
- Enter the code. Find ARN Smart Clonex in the table, paste the code into the
ARNA-…field and click Activate. - Check the result. Clonex is ready when its Licence column shows Active. The Clonex header then shows License Active, and the full ARN Clonex menu appears.
Note: On a multisite network, go to Network Admin → Settings → ARN Center. One licence covers the whole network. Only a network administrator can activate or change it; site administrators see that licences are managed by the network.
Licences are not managed inside Clonex itself. Inside Clonex, the licence button in the header (License Active or License Required) and the Licence card on the Clonex Settings screen open ARN Smart → ARN Center → Licences, and so does Settings → License in the Clonex navigation.
Read the licence table
| Column | What it shows |
|---|---|
| Product | The ARN product, a short form of its licence key and any licence error |
| Version | The installed version of the product |
| Licence | Active, Active (offline) or Locked |
| Expires | The end date of the licence, or No expiry |
| Files | Whether the plugin files match the released package: OK, Failed, Old result or Not verified yet |
Active (offline) means Clonex is running on its signed offline permission while the licence server cannot be reached. ARN Center keeps retrying in the background.
Buttons on the Licences screen
| Button | What it does |
|---|---|
| Activate | Activates the licence with the ARNA code you entered |
| Refresh | Checks an existing licence again |
| Verify now | Checks the plugin files against the released package |
| Disconnect | After a confirmation, releases the licence on the licence server and removes it from this site, so you can activate it on another site with a fresh ARNA code. A licence can be released three times in 30 days |
| Clear local data | Removes the stored licence data from this site; the licence must then be activated again |
| Run now | Runs the background licence renewal, update check and file verification immediately |
| Check for updates now | Checks for updates of all ARN products at once. Each product row then shows its Last update check; if updates were checked less than a minute ago, try again in a minute |
| Get support | Opens a form that sends a request to ARN Smart support for this product; see Get support below |
ARN Center renews the licences of every ARN product in the background. Visitor, AJAX and REST requests never contact the licence server. If the licence server cannot be reached, Clonex keeps working for up to 24 hours.
Move a licence to a new site address
A licence is bound to one site address. To use it on a new site address:
- On the old site, click Disconnect for ARN Smart Clonex in ARN Smart → ARN Center → Licences and confirm. The licence is released on the licence server and removed from that site. A licence can be released three times in 30 days.
- Request a new activation code through the link in your licence email.
- On the new site, activate Clonex with the new code in ARN Smart → ARN Center → Licences.
Deleting the plugin does not release the licence on the licence server, so use Disconnect first. If the old site is no longer available, or the panel says that ARN could not release the licence (for example after three releases in 30 days, with the date it is possible again), release it in ARN Account or contact ARN Smart support. ARN Smart support can also move the licence for you.
Installing again on the same site. From Clonex Pro 2.0.3, deleting Clonex keeps its licence on the site unless Delete all Clonex data when the plugin is deleted is on in Settings → Integrity (on a multisite network: on any site). Install Clonex again on the same site address and the licence continues without a new activation code; ARN Center checks the licence and the plugin files again in the background. If the licence was removed, because that option was on or you used Disconnect or Clear local data, request a new activation code through the link in your licence email and activate it there; the licence moves to the new installation. While another active ARN Smart plugin on the site still uses an ARN Core older than 2.0.6, deleting Clonex removes the licence as before, so update your ARN Smart plugins first. In Clonex Pro 2.0.2 and earlier, deleting the plugin always removed the licence from the site.
Get support
Each product row in ARN Smart → ARN Center → Licences has a Get support button for the users who manage the licences. It opens a form:
- Write a Subject and a Message.
- Check the Contact e-mail; it starts with your own address. ARN replies to the licence e-mail, and this address goes on the request as an extra contact. When the site holds no licence, ARN replies to this address.
- Leave Include these technical details ticked to send the details shown in the form: the WordPress and PHP versions, Clonex and its version, ARN Core, the licence status, the last update check, multisite and the site language. Untick it to send none of them.
- Click Send request.
The page shows the number of the request. ARN also receives the site address and, when the site holds a licence, its signed proof, so support can find the licence; the support desk never receives a licence key, activation code, password or installation secret. You can also open a ticket at support.arnsmart.com.
When the licence is not active
Without an active licence, nothing is deleted. Your pages, posts, products and the copies you made stay exactly as they are, and so do your Clonex templates, datasets and settings. The ARN Clonex menu shows only the page Clonex is locked until you activate the licence again. The Copy row action of Clonex Pro and the Clonex bulk actions in your content lists are not available either. If Clonex Free is active on the same site, it works fully in the meantime, with its own menu and Copy action.
On a staging copy
A Clonex staging copy uses the live site's ARN licence, so ARN Pro plugins work there without a new activation. Activate and Disconnect are blocked on the copy, because they would change the live site's licence; manage licences on the live site. See Make a private staging copy of the whole site.
A single site taken out of a multisite network with Site to single site does not take the network's licence along: activate the ARN Pro plugins there with their own licences. See Copy, split out and bring in network sites.
When files do not match the released package
If a protected Clonex file no longer matches the released package, Clonex stops and lists the files under Files that failed verification. Restore the official files (for example by uploading the Clonex Pro package again), then click Verify now in ARN Smart → ARN Center → Licences to unlock it.
If activation fails
- Make sure the code is a Clonex code and has not been used before. ARNA codes work once and expire; request a fresh code through the link in your licence email if needed.
- Copy the full
ARNA-…code without spaces. - Make sure you are activating on the site address the code is meant for.
- If the licence table says that the licence belongs to another site or installation, it is bound to another site address; see Move a licence to a new site address above.
- On a multisite network, only a network administrator can activate the licence.
- For an existing licence, click Refresh.
When you contact support, include the error message shown in the licence table. Never share your activation code or licence key in a support request.