ARN Smart Support
Language: English

Activate your WebPix Pro licence

Updated 12 Nov 2026 6 min read
Browse WebPix articles

WebPix Pro needs an active licence before it converts and serves images. Licences of all ARN Smart products on a site are managed in one place: Settings → ARN Center → Licences.

Activate the licence

  1. Get your activation code. Open the link in your licence email to request an ARNA activation code. The code is sent to the same email address; you do not need an account. The code starts with ARNA-. It works once and binds the licence to your site address.
  2. Open the Licences screen. In your WordPress admin, go to Settings → ARN Center and open the Licences tab. While the licence is not active, the WebPix Licence required page also has a button: Open Settings → ARN Center → Licences.
  3. Enter the code. Find WebPix in the table, paste the code into the ARNA-… field and click Activate.
  4. Check the result. WebPix is ready when its Licence column shows Active. The WebPix header then shows License active, and the full WebPix menu appears (Overview, Optimize, Library, Settings, Delivery & CDN, Media AI and Support).

Note: On a multisite network, go to Network Admin → Settings → ARN Center. One licence covers the whole network and is bound to the network's main domain. Only a network administrator can activate or change it; site administrators see that licences are managed by the network.

Read the licence table

ColumnWhat it shows
ProductThe ARN product, a short form of its licence key and any licence error
VersionThe installed version of the product
LicenceActive, Active (offline) or Locked
ExpiresThe end date of the licence, or No expiry
FilesWhether the plugin files match the released package: OK, Failed, Old result or Not verified yet

Active (offline) means WebPix is running on its signed offline permission while the licence server cannot be reached. ARN Center keeps retrying in the background.

Buttons on the Licences screen

ButtonWhat it does
ActivateActivates the licence with the ARNA code you entered
RefreshChecks an existing licence again
Verify nowChecks the plugin files against the released package
DisconnectAfter a confirmation, releases the licence on the licence server and removes it from this site, so you can activate it on another site with a fresh ARNA code. A licence can be released three times in 30 days
Clear local dataRemoves the stored licence data from this site; the licence must then be activated again
Run nowRuns the background licence renewal, update check and file verification immediately
Check for updates nowChecks for updates of all ARN products at once. Each product row then shows its Last update check; if updates were checked less than a minute ago, try again in a minute
Get supportOpens a form that sends a request to ARN Smart support for this product; see Get support below

ARN Center renews the licences of every ARN product in the background. Visitor, AJAX and REST requests never contact the licence server. If the licence server cannot be reached, WebPix keeps working for up to 24 hours.

Move a licence to a new site address

A licence is bound to one site address. To use it on a new site address:

  1. On the old site, click Disconnect for WebPix in Settings → ARN Center → Licences and confirm. The licence is released on the licence server and removed from that site. A licence can be released three times in 30 days.
  2. Request a new activation code through the link in your licence email.
  3. On the new site, activate WebPix with the new code in Settings → ARN Center → Licences.

Deleting the plugin does not release the licence on the licence server, so use Disconnect first. If you also delete WebPix on the old site, turn on Support → When WebPix is deleted → Remove settings and statistics first, so the old licence data is removed too. If the old site is no longer available, or the panel says that ARN could not release the licence (for example after three releases in 30 days, with the date it is possible again), release it in ARN Account or contact ARN Smart support. ARN Smart support can also move the licence for you.

Get support

Each product row in Settings → ARN Center → Licences has a Get support button for the users who manage the licences. It opens a form:

  1. Write a Subject and a Message.
  2. Check the Contact e-mail; it starts with your own address. ARN replies to the licence e-mail, and this address goes on the request as an extra contact. When the site holds no licence, ARN replies to this address.
  3. Leave Include these technical details ticked to send the details shown in the form: the WordPress and PHP versions, WebPix and its version, ARN Core, the licence status, the last update check, multisite and the site language. Untick it to send none of them.
  4. Click Send request.

The page shows the number of the request. ARN also receives the site address and, when the site holds a licence, its signed proof, so support can find the licence; the support desk never receives a licence key, activation code, password or installation secret. You can also open a ticket at support.arnsmart.com.

When the licence is not active

Without an active licence, nothing is deleted. Your original images and the existing copies stay where they are, and your pages simply show the original images. WebPix shows only the Licence required page and Support until you activate it again.

When files do not match the released package

If a protected WebPix file no longer matches the released package, WebPix pauses and lists the files. Restore the official files (for example by uploading the WebPix Pro package again), then click Verify now in Settings → ARN Center → Licences to unlock it.

If activation fails

  • Make sure the code is a WebPix code and has not been used before. ARNA codes work once and expire; request a fresh code through the link in your licence email if needed.
  • Make sure you are activating on the site address the code is meant for.
  • On a multisite network, only a network administrator can activate the licence.
  • For an existing licence, click Refresh.

When you contact support, include the error message shown in the licence table. Never share your activation code or licence key in a support request.

On this page

Submit a ticket

Create a new support request without needing a portal account.

Priority
Attachments
Only you and our staff see a ticket. Never send passwords or licence codes.

Track a ticket

Use the ticket number and password from your confirmation email.

The number and the password are in your confirmation email.

Sign in

Access your support portal account.

New here?

Create account

Create your support portal account.

Already have an account?

Forgot password?

We email you a link to choose a new password.

Conversation

Was this helpful?
Open full article
↑ ↓ to moveEnter to openEsc to close