ARN Smart Support
Language: English

How Eagle3D calculates cost and profit

Updated 9 Nov 2026 4 min read
Browse Eagle3D articles

The Eagle3D cost engine calculates the cost of every product from its recipe and your settings. It adds the overhead share and the sales-channel commission, and calculates profit on the price without tax. The same calculation is used for the product list, every order line and all reports, and for the cost preview in the product form, the Production Calculator and Production Planning.

Eagle3D illustration of recipe, time, labour and electricity inputs producing cost and margin

Direct production cost of one part

PartHow it is calculated
FilamentWeight in kg × filament price per kg × failure factor
WasteWaste in kg × filament price per kg × failure factor
Additional materialsQuantity × unit price of each material × failure factor
EnergyPrinter watt ÷ 1000 × print hours × electricity price per kWh
LabourLabour minutes ÷ 60 × labour rate per hour
Printer depreciationPrint hours × the printer's hourly depreciation
Repair allowance(Filament + waste + materials) × repair rate %
  • Filament price: the price of the default supplier of that filament; without supplier prices, the filament's own price per kg.
  • Failure factor: the printer's Default Failure Rate (%) raises material use to cover failed prints. The material cost is divided by (1 − failure rate); at 10%, it is divided by 0.9. The failure rate applies to filament, waste and materials only.
  • Repair allowance: the business-wide Repair Rate (%) from Cost Settings covers extra material for prints that are fixed rather than thrown away.
  • Hourly depreciation: calculated in the printer profile from purchase price ÷ (lifespan in years × 365 × daily usage hours × utilization %). Utilization is part of the formula; the update to 2.0.0 recalculates the hourly depreciation of existing printers, and order lines that are already saved keep their cost.

Overhead share

Each product carries a share of your monthly overhead:

  1. Machine-hours pool. All active overhead expenses with the distribution type Monthly (allocated by machine hours) are added up. In the company profile, the monthly cost of staff with the cost type General Staff (added to overhead) joins this pool.
  2. Effective capacity. For every active printer: daily usage hours × utilization × working days per month, added up.
  3. Share per part. Pool ÷ effective capacity × the part's print hours.
  4. Printer maintenance. The printer's Monthly Maintenance Cost ÷ that printer's own capacity × print hours. It is charged only to products printed on that printer.
  5. Per-unit expenses. Expenses with the type Per Unit (fixed amount per product) are added to every unit as a fixed amount.

If a product uses Enter overhead manually, its Manual Overhead Amount replaces the automatic share. Custom order lines take no overhead share, because they use no machine time.

Sales-channel commission

When an order has a sales channel, every line of the order pays:

  • the channel's Commission (%) on the line total, plus
  • the channel's Fixed Fee.

Orders without a channel (Direct sale (no channel)) pay no commission. The same product therefore shows a different profit on each channel.

Revenue, tax and profit

  • Revenue without tax: prices in Eagle3D include tax. The engine divides the price by (1 + tax rate) using the active rate from Settings → Tax Settings (if several are active, the first one).
  • Total cost: production cost + overhead share + channel cost.
  • Profit: revenue without tax − total cost.
  • Margin: profit ÷ revenue without tax.
  • Markup: profit ÷ total cost.

For an order line, revenue is the price actually charged on that line (after discounts), not the product's list price.

Cost saved with every order line

When an order is created, imported from a store or converted from a quote, Eagle3D saves the cost and profit of each line with it: production, channel and overhead cost, revenue without tax, profit, margin and markup, together with the printer and the print hours.

  • Later changes to filament prices, rates or overhead do not change lines that are already saved.
  • Editing an order's lines saves them again with the current prices and rates.
  • The dashboard, the order list and all reports read these saved figures.

The same calculation on every screen

The Cost Preview in the product form, the Production Calculator and Production Planning get their figures from the cost engine, so they calculate exactly like the product list:

  • the printer's failure rate is applied to filament, waste and materials;
  • the overhead share is calculated automatically; in the product form and in Production Planning, the product's Manual Overhead Amount replaces it when Enter overhead manually is ticked;
  • profit is calculated on the price without tax;
  • Overhead is shown as its own line next to the parts of the direct production cost.

Sales-channel commission is added only on order lines, because it depends on the channel of the order. An order line can therefore show a lower profit than the product list when its channel takes a commission, or a different profit when it is sold at another price. See Price a one-off job and plan a production batch.

Actual results always depend on the printers, materials, rates and channels you enter.

On this page

Submit a ticket

Create a new support request without needing a portal account.

Priority
Attachments
Only you and our staff see a ticket. Never send passwords or licence codes.

Track a ticket

Use the ticket number and password from your confirmation email.

The number and the password are in your confirmation email.

Sign in

Access your support portal account.

New here?

Create account

Create your support portal account.

Already have an account?

Forgot password?

We email you a link to choose a new password.

Conversation

Was this helpful?
Open full article
↑ ↓ to moveEnter to openEsc to close