The cost engine reads a few business-wide values. Set them once and update them when your prices change. All of these settings are in the Business group on the left of the Settings screen (administrators only).
Cost Settings
Open Settings → Cost Settings:
| Setting | What it does |
|---|---|
| Electricity Price (per kWh) | Used with the printer's watt and the print time for the energy cost. Empty in a new installation: until you enter it in your currency, energy cost is not calculated and a warning is shown |
| Labor Rate (per hour) | One labour rate for the whole business. Each product only stores its labour time. |
| Working Days (per month) | Used to calculate printer capacity for the overhead share and the machine report (26 unless you change it) |
| Repair Rate (%) | Extra material for prints that are repaired, as a percentage of material cost (0 to 100) |
Without an electricity price, Cost Settings, the product form and the calculator show "No electricity price has been entered, so energy cost is not calculated. Enter the price per kWh in your currency under Settings > Cost Settings." An installation updated from an earlier version that never saved an electricity price keeps calculating as before: the update writes the earlier default of 2.5 into the setting, where you can check and change it.
The small helper Calculate hourly rate divides a Total Staff Cost (monthly) by the Total Working Hours (monthly). Click Calculate to put the result into Labor Rate (per hour), then click Save.
Overhead Expenses
Open Settings → Overhead Expenses and click New Overhead Expense for each monthly cost, such as rent, software or insurance:
- Expense Name
- Monthly Amount
- Distribution Type: Monthly (allocated by machine hours) spreads the amount over your printers' capacity and charges it per print hour; Per Unit (fixed amount per product) adds the amount to every unit.
A single product can use a fixed overhead amount instead, with Enter overhead manually in the product form. See How Eagle3D calculates cost and profit.
Sales Channels
Open Settings → Sales Channels and click New Sales Channel for each marketplace, shop or platform you sell through:
- Channel Name
- Commission (%): charged on the total of each order line
- Fixed Fee: added to each order line
You choose the channel on each order, for online orders in Settings → Online Orders and for each store connection. Orders without a channel are a Direct sale (no channel). The Sales & Profit Report compares channels after commission and fees.
Tax Settings
Open Settings → Tax Settings and click New Tax Setting:
- Tax Name, for example VAT
- Rate (%)
Eagle3D treats your prices as tax-inclusive and calculates profit on the price without this rate. Keep one tax setting active; if several are active, the first one is used.
Material Types
Settings → Material Types groups non-filament materials. A new English installation starts with Paint, Hardware, Packaging, Electronics, Adhesive and Additional. Click New Material Type to add your own.
Staff costs (company profile)
In the Business / Print Farm profile, the Staff menu records the monthly cost of your team:
- Open Staff and click New Staff Member.
- Enter Name, Role and Monthly Cost, and choose the Cost Type (see the table below).
- For direct production staff, enter the Monthly Working Hours. It is used only for the suggested rate.
- Click Save.
| Cost Type | Use it for | How the cost reaches products |
|---|---|---|
| General Staff (added to overhead) | Management, sales, accounting | Joins the machine-hours overhead pool |
| Direct Production (billed per order) | People who work on the parts | Through the labour rate and each product's labour time |
The summary shows General Staff (monthly), Direct Production (monthly) and the Suggested Hourly Rate (direct production cost ÷ their monthly hours). Click Apply to write the suggested rate into Settings → Cost Settings → Labor Rate (per hour).